[CONTACT]

[ABOUT]

[POLICY]

This is a only version

Found at: raymii.org:70/3D_modelling_a_real_world_object_in_OpenSCAD.txt

This is a text-only version of the following page on https://raymii.org:
---
Title       : 	3D modeling a real world object in OpenSCAD
Author      : 	Remy van Elst
Date        : 	02-03-2014
URL         : 	https://raymii.org/s/articles/3D_modelling_a_real_world_object_in_OpenSCAD.html
Format      : 	Markdown/HTML
---



This article shows you how I built a real world object in OpenSCAD and how I got
it 3D printed. OpenSCAD is a Solid 3D modeling based on the Computational
Geometry Algorithms Library. It is not like Blender, AutoCAD or Maya, who allow
you to visually create and manipulate something. OpenSCAD allows you to program
the entire thing. Want a cube? Type cube([10,10,10]) and you have a cube. I have
no previous experience in 3D modeling or OpenSCAD, however, in about three hours
I had my thing ready made.

I'm developing an open source monitoring app called Leaf Node Monitoring, for windows, linux & android. Go check it out!

Consider sponsoring me on Github. It means the world to me if you show your appreciation and you'll help pay the server costs.

You can also sponsor me by getting a Digital Ocean VPS. With this referral link you'll get $100 credit for 60 days.



### The Thing

![sleutel][2]

This is a key used by the Dutch Railways (NS) staff. A [conductor][3] uses it to
close all the doors when a train is about to depart. They put the key in a panel
like this:

![deurbedieningstableau][4]

turn the key to the left which closes all the other doors, then press the blue
button which closes their door and sends a signal to the train driver that he is
allowed to drive away.

I've got multiple train drivers and conductors in my family so I have access to
these keys. Therefore it was a nice and simple "thing" to get started with.

![end result][5]

This is a picture of the end result. The full key in top, right, left and
diagonal viewport.

The [OpenSCAD Manual][6] was a great help to me. The [making a Thing with
OpenSCAD][7] from Hack a Day was what got me started with OpenSCAD.

### The left piece

I started with the left piece because it is a very simple cylinder with a cube
extruded. The radius of the cylinder is 7.5 mm, the height is 35mm.

OpenSCAD has no notice of units like centimeters, millimeters or inches. If you
define a `cube([10,10,10])` you don't get a cube of 10 by 10 by 10 cm or mm, you
just get a cube of 10 by 10 by 10. It is up to the 3D printing company to decide
what those units mean. Shapeways lets you select it when you upload the model,
in the order email to my 3D printing company I state that I want the units to be
mm.

    
    
    $fn=100
    
    module left_piece() {
        difference() {
            // cylinder diameter is 15mm
            cylinder(h=35,r=7.5);
            // inner cube width and height is 9mm
            cube(size=[9,9,20], center=true );
        }
    }
    left_piece();
    

![left 1][8]

Now press `F5` and see your first part of the key be created. We created a
cylinder with a height of 35 and a radius of 7.5. The `difference` operation, as
you might expect, substracts the cube from the cylinder, this giving us a
cylinder with a little square hole in it. As you also noticed, line comments
start with `//`.

The `$fn=100` is the resolution of sphere and cylinder objects. Put it at the
top of your OpenSCAD document.

As you might have noticed on the photo, the left piece also has a little hole in
it. This is used to put a key ring in. Lets add that hole. We'll have to to
substract a small cylinder from the cylinder. However, this time we need the
hole to be rotated about 90 degrees, otherwise it would be from the top to the
bottom. We don't want that, we want it to go from left to right. We also want it
to be a bit on top, not like the cube which is on the bottom.

We therefore use two operations, First the `translate` operation, which moves
objects in the 3d space by the given axis. Then the `rotate` operation, which
rotates objects:

    
    
    module left_piece() {
        difference() {
            // cylinder diameter is 15mm
            cylinder(h=35,r=7.5);
            // inner cube width and height is 9mm
            cube([9,9,20], true );
            translate([0,15,30]) {
                rotate([90,0,0]) {
                    cylinder(h=30, r=2.5);
                }
            }
        }
    }
    
    left_piece();
    

![left 2][9]

We first create a cylinder with a height of 30 (which should be more than long
enough to provide a full hole in our key piece) and a radius of 2.5. This radius
was measured on the original key. Then we move it by 15 on the Y-axis and by 30
on the Z-axis.

If you want to get a more visual understanding of what is happening here, try to
change the `difference()` operation at the top to `union()`. Instead of
substracting the primitives from each other, this combines all the objects. It
looks like this:

![left 3][10]

This is our full left piece right now. Leave the code up there, except for the
last line `left_piece();`. We are going to work on our right piece, and will put
it all together later on.

### Right piece

The right piece is also quite simple. OpenSCAD has the `hull` operation, which
combines one or more shapes together to a solid. We are going to place a small
square and a larger square and connect those together:

    
    
    module right_piece(){
        hull() {
            // from heart of bottom_piece to end of right_piece = 35mm
            translate([0,0,28]) {
                    cube(size=[5,5,1], center=true);
            }
            // right_piece thickness at begin right_piece is 10mm
            // right_piece thickness at end is 5mm
            cube(size=[10,10,1], center=true);
        }
    }
    
    right_piece();
    

![right 1][11]

If you want to see more visually what the `hull` operation does, try changing it
again to `union`. It then looks like this:

![right 2][12]

We are done with the right piece right now. Later on we will build a connecting
piece which will hold the right, left and bottom piece together. Remove the last
`right_piece();` line and move on to the bottom part.

### Bottom piece

The bottom piece consists out of a few things, a cylinder with a triangle taken
out. There are two large holes and one smaller hole, plus a cube at the end of
the cylinder. Let's start with the cylinder and the triangle.

    
    
    module bottom_piece() {
        difference() {
            cylinder(h=50,r=6);
            translate([-0,0,30]) {
                linear_extrude(height = 51, center = true, convexity = 10) {
                    polygon(points=[[-4,-2],
                             [4,-2],
                             [0,5]],
                            paths=[[0,1,2]]);
                }
            } 
        }
    }
    
    bottom_piece();
    

![bottom 1][13]

First we create a cylinder with a height of 50 and a radius of 6. We then create
a triangle using the `polygon` primitive. The `points` specify the corner points
of the triangle, which are measured up with a ruler.

Let's add the little cube at the bottom. It does not need to be in the above
`difference` operation, it just needs to be placed at the bottom of the
cylinder. We'll create a small 3x4x3 cube and use `translate` to place it at the
bottom of the piece:

    
    
    module bottom_piece() {
        difference() {
            cylinder(h=50,r1=6,r2=6);
            translate([-0,0,30]) {
                linear_extrude(height = 51, center = true, convexity = 10) {
                    polygon(points=[[-4,-2],
                             [4,-2],
                             [0,5]],
                            paths=[[0,1,2]]);
                }
            }
        }
        translate([0,-7,48.5]) {
            cube(size=[3,4,3], center=true);
        }
    }
    
    bottom_piece();
    

![bottom 2][14]

We now just need to add the three holes. Because we have two of the same holes,
we are going to make a module of the holes. That means we make a "solid" hole
module and difference it with the cylinder.

The `short_hole_in_bottom_piece` is a simple cylinder rotated to the right
position:

    
    
    module short_hole_in_bottom_piece() {   
        translate([-6,0,5]) {
            rotate([0,90,0]) {
                cylinder(h=12,r=1.5);
            }
        }
    }
    

![bottom 3][15]

You should be able to understand what we are doing in the above code by now.

The `long_hole_in_bottom_piece` will consist out of two
`short_hole_in_bottom_piece`'s with a `hull` operation:

    
    
    module long_hole_in_bottom_piece() {
        difference() {
            translate([0,0,-5]) {
                short_hole_in_bottom_piece();
            }
            short_hole_in_bottom_piece();
        }
    }
    

![bottom 4][16]

The first translate is required to place the cylinder above the other for the
`hull` operation. If we change the `hull` operation to a `union` like we did
before, it looks like this:

![bottom 5][17]

We'll use a few translate operations to place the holes in the earlier created
`difference` operation:

    
    
    module bottom_piece() {
        difference() {
            cylinder(h=50,r1=6,r2=6);
            translate([0,0,9]) {
                long_hole_in_bottom_piece();
            }
            translate([0,0,-2]) {
                short_hole_in_bottom_piece();
            }
            translate([0,0,24]) {
                long_hole_in_bottom_piece();
            }
            translate([-0,0,30]) {
                linear_extrude(height = 51, center = true, convexity = 10)
                polygon(points=[[-4,-2],
                             [4,-2],
                             [0,5]],
                            paths=[[0,1,2]]);
                } 
        }
    
        translate([0,-7,50-1.5]) {
            cube(size=[3,4,3], center=true );
        }
    }
    
    bottom_piece();
    

![bottom 6][18]

For reference, here is the same code as above with the `difference` replaced by
`union`:

![bottom 7][19]

### Connecting piece

The connecting piece was the hardest piece to figure out and measure up. It is a
cube with a cylinder, plus a hole at the top. It also needs to match the holes
the `bottom_piece` has. Let's start with the cube and the cylinder hole:

    
    
    module connecting_block_left_piece() {
        difference(){
            translate([0,0,9]) {            
                cube([10,10,20], true);
            }   
            translate([2,8,8]) {
                rotate([90]) {
                    cylinder(20,1.5,1.5);
                }
            }
        }
    }
    

![connect 1][20]

The next thing we are going to add is the circle which will match the
`left_piece`:

    
    
    module connecting_block_left_piece() {
        translate([0,0,-16]) {
            translate([-3,0,15]) {
                cylinder(h=6,r=6);
            }
        }
        difference(){
            translate([0,0,9]) {            
                cube([10,10,20], true);
            }
            translate([2,8,8]) {
                rotate([90]) {
                    cylinder(20,1.5,1.5);
                }
            }
        }
    }
    

![connect2][21]

Last but not least we need to put the first `long_hole_in_upper_key` in this
block, otherwise it will look ugly:

    
    
    module connecting_block_left_piece() {
        translate([0,0,-16]) {
            translate([-3,0,15]) {
                cylinder(h=6,r=6);
            }
        }
        difference(){
            translate([0,0,9]) {            
                cube([10,10,20], true);
            }
            translate([-8,3,8]) {
                rotate([90,0,0]) {
                    scale([1,1,2]) {
                        long_hole_in_bottom_piece();
                    }
                }   
            }
            translate([2,8,8]) {
                rotate([90]) {
                    cylinder(20,1.5,1.5);
                }
            }
        }
    }
    

That's it. It took me quite a while to get the measurements right, but a ruler
is your friend in this case.

### Putting it all together

We now have made four individual components of the key. We of course want to put
them all together so we have a good model. Let's start first with the upper part
of the key, connecting the `left_piece`, the `right_piece` and the
`connecting_block_left_piece`.

    
    
    module full_upper_piece(){
        translate([3,0,-4]) {
            left_piece();
        }
        translate([5,0,32]) {
            connecting_block_left_piece();
        }
        translate([5,0,48]) {
            right_piece();
        }
    }
    

This looks like so:

![full1][22]

![full2][23]

Now add the `bottom_piece` to the `full_upper_piece`:

    
    
    module full_key() {
        translate([10,0,40]) {
            rotate([90,180,-90]) {
                bottom_piece();
        }
        full_upper_piece();
    }
    

![full3][24]

There you have your full key. Render it:

    
    
    rotate([0,-90,90]) {
        full_key();
    }
    

And you're done.

### 3D printing

I've let my 3D models print by Ridix in Rotterdam. They've print it on a
Dimension SST 1200es with ABS+ material. This (it what they've told me) is
stronger than regular ABS. The quality and especially sturdiness is very well.
I've tested the key over 90 times in a panel like above, and it still works.
They're very friendly and fast with printing, mostly overnight, and if you're
early with sending sometimes the same day.

   [1]: https://www.digitalocean.com/?refcode=7435ae6b8212
   [2]: https://raymii.org/s/inc/img/3d/sleutel.png
   [3]: http://en.wikipedia.org/wiki/Conductor_%28transportation%29
   [4]: https://raymii.org/s/inc/img/3d/deurbedieningstableau.jpg
   [5]: https://raymii.org/s/inc/img/3d/full-key.png
   [6]: https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/The_OpenSCAD_Language
   [7]: http://hackaday.com/2013/12/11/3d-printering-making-a-thing-with-openscad/
   [8]: https://raymii.org/s/inc/img/3d/left-1.png
   [9]: https://raymii.org/s/inc/img/3d/left-2.png
   [10]: https://raymii.org/s/inc/img/3d/left-3.png
   [11]: https://raymii.org/s/inc/img/3d/right-1.png
   [12]: https://raymii.org/s/inc/img/3d/right-2.png
   [13]: https://raymii.org/s/inc/img/3d/bottom-1.png
   [14]: https://raymii.org/s/inc/img/3d/bottom-2.png
   [15]: https://raymii.org/s/inc/img/3d/bottom-3.png
   [16]: https://raymii.org/s/inc/img/3d/bottom-4.png
   [17]: https://raymii.org/s/inc/img/3d/bottom-5.png
   [18]: https://raymii.org/s/inc/img/3d/bottom-6.png
   [19]: https://raymii.org/s/inc/img/3d/bottom-7.png
   [20]: https://raymii.org/s/inc/img/3d/connect-1.png
   [21]: https://raymii.org/s/inc/img/3d/connect-2.png
   [22]: https://raymii.org/s/inc/img/3d/upper-full-1.png
   [23]: https://raymii.org/s/inc/img/3d/upper-full-2.png
   [24]: https://raymii.org/s/inc/img/3d/full-key-2.png

---

License:
All the text on this website is free as in freedom unless stated otherwise. 
This means you can use it in any way you want, you can copy it, change it 
the way you like and republish it, as long as you release the (modified) 
content under the same license to give others the same freedoms you've got 
and place my name and a link to this site with the article as source.

This site uses Google Analytics for statistics and Google Adwords for 
advertisements. You are tracked and Google knows everything about you. 
Use an adblocker like ublock-origin if you don't want it.

All the code on this website is licensed under the GNU GPL v3 license 
unless already licensed under a license which does not allows this form 
of licensing or if another license is stated on that page / in that software:

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see .

Just to be clear, the information on this website is for meant for educational 
purposes and you use it at your own risk. I do not take responsibility if you 
screw something up. Use common sense, do not 'rm -rf /' as root for example. 
If you have any questions then do not hesitate to contact me.

See https://raymii.org/s/static/About.html for details.


AD: