[CONTACT]

[ABOUT]

[POLICY]

Telenet The Secret For people and

Found at: 0x1bi.net:70/textfiles/file?hacking/telenet.hac



Telenet The Secret Exposed...
 
For years, people and myself, have offtend tried to"work telenet unto a coma"..
With no success, for the past few years, i have gathered data, and finally
know the system, its faults, capabilities, and errors.
This really should be in a text file, but. i wish this information to
be reserved for the few users on this system.
 
before i start, here are a few basic commands to get famialir with:
 
Execution          syntax of command             function
------------------------------------------------------------------------
 
Connect            c (sp)                        Connects to a host (opt)
 
Status             stat                          Displays network port add
 
Full-Duplex        full                          network echo
 
Half-Duplex        half                          Termnial echo
 
Mail
  or
Telemail           mail    telemail              telemail
 
 
Read Paramaters    par?        par?(sp)2:0,3:2   display pad
 
Set and read
 
escape                                         escape from data modew
 
File Trasnfer      dtape                         Prepares network for bulk
 
continue           cont
 
 
 
terminial          term(sp)d1                    Set TERM
 
test

                   test(sp)char
 
 
                   test(sp)echo
 
 
                   test(sp)triangle
 
 
this is the end of the commands,   view next msg for useage:
 
Trap and pipe x.25 prot. (telenet)...
 
flow chart, will only work on a machine with atleast 10 Mhz..
However, an account on a unix, with cu capabilities will also work..
 
before, i go into detail, let me give you and over view...
 
 
 
-------------
    Host
-------------
           !
           !
           !
           !
           -----------------
              telenet, remote
       $      divertor, and
              pacakge.
           ------------------
                             !
                             !
                   ---------------------
                   !      !    !       !
                   !      !    !       !
                   u      u    u       u
                   s      s    s       s
                   e      e    e       e
                   r      r    r       r
                   s      s    s       s
 
s how its packaged, for instance the first 100 mills. will be from user
on then two etc.. The way telenet can tell which is user is which, is
and piping, a lead off of telenet, is to have as system running four
the appropriate delays... As you can see this is where a 10 Mhz +
 
On the host end.
 
The host end consists of three things..
 
 
 
 
at telenets, "weakest" link..
 
Network Pad
----------
 
There are three types of network pads   a 4 pad 12 pad and 32 pad
They really do not make a diffrence, it only changes the amount
of users, capable of using on line..
 
example. if you have a 4 network pad.  you system will be able to handle
four users from telenet   etc...
 
The network pad is Such a piece of"shit you have know idea..
 
All parameters are set remotly by a telenet eng..
 
This is important...
 
 
to give you a small ifea, of$the amount of programing in thms pad (which
 might add has over 2 megs of internal RAM) for an eng. to upload it ct
 
The Pad is not a computer,  if ytou think about it though, if your
traveling at 1200 on telenet, your actually travling at 9600 and back to
 
How is the pad set remotly..
 
lets take an example...
 
c 2122
 
now c 2122  /(?this is an example)
 
 
c"212.01
c 212.02
   etc....
 
nodes can also"be stated as  2122a  is the same as "2122.01
and 2122.03 is the same as 2122c
 
Now that we know how to access the indiv. nodes. let me show you a small
 
Theres a programing node.. so an eng. can upload, to your network pad..
 
every address has it...
t always ends in  99
 
 
 would enter   c 2122.99
 
you would get a connected.. but is you notice nothin happens..
 
at this point do not touch any keys.. a wrong key stroke, will
most likely alert someone to your tampering..
(dont forget, all network pads have a direct alarm signle.. so follow my 
 
enter in :
 
                  
 
                                        
 
f you dont give it a min. then hit return. your actually there. but the
 
Now type

 
 
then type in     cont
 
to continue, with the host you brokg from.....
 
you will get a message:
 
TP3005 DEBUG PORT V5.37.03
>
 
 
 
your now, directly accessed the network pad..
 
 
                                            However
f your prompted for a password, of if nothing happens:
telenet has two standard passwords:
                                       superman
         and
                                   $  wonderwomen
                                                           >
 
type the following:
 
                        7FDS
HIT RETURN
 
    youll get a responce:  $  E  01
 
NOW TYPE IN:
                                  L7FE,L,A2,R2,D
 
then youll get a message:         R  00A626   8805
 
now enter ing:                    40588
 
YOUR RESPONCE WILL BE :           E   01
 

now type in >           R0589
 
YOU'LL GET A WHOLE LIST OF DATA THAT IS CURRENTLY CROSSING THE PADS
DUPLEX.
ONE LINE WILL LOOK LIKE THIS:
 
 
 
R 00A625   06805FF17068703  1287100230050540  0000000000000000  FF020101000000

■"&]%%+f! !  )19AIQYai 



 It seems that not many of you know that Telenet is connected to about 80 
computer-networks in the world. No, I don't mean 80 nodes, but 80 networks 
type ID XXXX when being connected to Telenet? You are then asked for the 
                  CHRIS  !!!) 
                  hosts connected to it is the DNA (Defense Nuclear Agency)!!!) 
                  research centers in the world) Login as GUEST 
                  use the ID 999_ with the password 9_ 
                  the Multi-User-Dungeon !) 
                  ID HELP  with password HELP  works fine with security level 3 
                  is connected to Telenet, too !)  ID and Password is: PETER 
                  You can read the news of the next day ! 
 
The prefixes are as follows: 
...and so on... Some of the countries have more than one packet-switching- 
network (USA has 11, Canada has 3, etc). 
 
OK. That should be enough for the moment. As you see most of the passwords 
are very simple. This is because they must not have any fear of hackers. Only 
a few German hackers use these networks. Most of the computers are absolutely 
easy to hack !!! 
So, try to find out some Telenet-ID's and leave them here. If you need more 
numbers, leave e-mail. 
Telenet. We have a lot of those NUI's for the German network, but none for 
a special Tymnet-outdial-computer in USA, which connects me to any phone #. 
 
CUL8R,  Mad Max 
 


  Distributed in part by:

   Skeleton Crue  xxx-xxx-xxxx  located out of Moraga, California.
         !!Get on the band wagon before it RUNS YOU DOWN!!
The very LAST bastion of Abusive Thought in all of the Suburbian West Coast...
                              (CH&AOS)